From: Alexander Batyuk
Date: 15 September 2011 07:48
Dear colleagues,
I have a problem running procheck on Mac OS X 10.6.8. It stops with the following error:
..................................................................
Stereochemical quality plots and residue-by-residue listing
At line 2639 of file /sw64/src/fink.build/ccp4-6.2.0-101/ccp4-6.2.0/src/procheck/pplot.f (unit = 14, file = 'rama.sum')
Fortran runtime error: Sequential READ or WRITE not allowed after EOF marker, possibly use REWIND or BACKSPACE
I would appreciate any help.
Thank you and best wishes,
Alex
--
Alex Batyuk
The Plueckthun Lab
www.bioc.uzh.ch/plueckthun
----------
From: Saul Hazledine
Hello Alex,
I know nothing about Procheck but the following may be of interest to you. There is a similar error message produced during ARP/wARP model building as described in the message below:
https://www.jiscmail.ac.uk/cgi-bin/webadmin?A2=CCP4BB;30c74e5a.1109
This error was found to be caused by the behaviour of gfortran 4.6.x which is currently used by Fink.
If your problem is related to the ARP/wARP issue then you should be able work around it by installing CCP4 from the DMG file provided on the CCP4 site. This DMG file contains executables compiled by the Intel Fortran compiler.
Saul Hazledine
Date: 15 September 2011 07:48
Dear colleagues,
I have a problem running procheck on Mac OS X 10.6.8. It stops with the following error:
..................................................................
Stereochemical quality plots and residue-by-residue listing
At line 2639 of file /sw64/src/fink.build/ccp4-6.2.0-101/ccp4-6.2.0/src/procheck/pplot.f (unit = 14, file = 'rama.sum')
Fortran runtime error: Sequential READ or WRITE not allowed after EOF marker, possibly use REWIND or BACKSPACE
I would appreciate any help.
Thank you and best wishes,
Alex
--
Alex Batyuk
The Plueckthun Lab
www.bioc.uzh.ch/plueckthun
----------
From: Saul Hazledine
Hello Alex,
I know nothing about Procheck but the following may be of interest to you. There is a similar error message produced during ARP/wARP model building as described in the message below:
https://www.jiscmail.ac.uk/cgi-bin/webadmin?A2=CCP4BB;30c74e5a.1109
This error was found to be caused by the behaviour of gfortran 4.6.x which is currently used by Fink.
If your problem is related to the ARP/wARP issue then you should be able work around it by installing CCP4 from the DMG file provided on the CCP4 site. This DMG file contains executables compiled by the Intel Fortran compiler.
Saul Hazledine
No comments:
Post a Comment